"Loading..."

Franjo Tuđman Bridge

Franjo Tuđman Bridge

The Franjo Tuđman Bridge is a cable-stayed bridge carrying the D8 state road at the western approach to Dubrovnik, Croatia across the Rijeka Dubrovačka inlet near the Port of Gruž. The original bridge design was developed in 1989, however construction was stopped at the onset of the Croatian War of Independence. The bridge is 518-metre (1,699 ft) long, measured between the abutments. Construction of the bridge started in October 1998 and the bridge was officially opened on May 21, 2002.

Tom Gomez

Image size: 5070 x 3380, 34.39Mb | Camera details: SONY NEX-7 | Date uploaded: 29/12/2020

Tom Gomez | Franjo Tuđman Bridge
Available as:

Designed to cover a large amount of wall space, canvas prints are ideal for big rooms. We only use 100% cotton canvas with a thickness of 340GSM, not cheap synthetic fibre alternatives. All dimensions for canvas products are in inches. Our normal finish is to 'wrap' the edges - please e-mail us at time of order if you require mirrored, black or white edges.


We print with a 12 colour process, this means we can print a much larger colour range than most printing companies that normally use a 4 or 8 colour process. All sizes for our gloss paper prints are in inches. Please note prints are supplied without mounts or frames.


We print with a 12 colour process, this means we can print a much larger colour range than most printing companies that normally use a 4 or 8 colour process. All sizes for our matt paper prints are in inches. Please note our prints are supplied without mounts or frames.


We print with a 12 colour process, this means we can print a much larger colour range than most printing companies that normally use a 4 or 8 colour process. All sizes for our satin paper prints are in inches. Please note our prints are supplied without mounts or frames.


Square (with rounded edges) High quality, cork backed, gloss finish on the front. Size - appx 9.5cm.


Our wall clocks measure appx 19cm square and are sublimation printed on to aluminium to give a durable high gloss finish. Ideally suited to square images but we will provide a proof before printing if you select any other ratio. Requires a single AA battery (not included)


6mm foam backed - printable are appx 24cm X 19cm. We need appx 3mm bleed for these.


A white, 10oz ceramic mug with a maximum printable area of 9cm high by 18cm wide


A 'proper mug' - 15 oz of pure indulgence, maximum print area 9cm high by 18cm wide.


A white 8 oz mug, altogether more 'dainty', maximum print area of 9cm high by 17cm wide


Printed both sides (same design) our tote bags are made from hard wearing, tightly woven white polyester with an overall size of appx 42 X 45cm and a maximum printing area of 27 X 40cm. Ideal in these days of re-useable bags.


Non-insulated aluminium water bottle with a white enamel coating, complete with both sports and conventional tops. 600ml capacity - not suitable for hot or carbonated drinks, not dishwasher safe. These work best with square or landscape images and have a maximum printable area of 8cm high X 17cm around.